|
2nd NATIONAL SEMINAR
ON WELDING SCIENCE & TECHNOLOGY March 15,17-2005, Islamabad |
|
1. The Pakistan Welding Institute Present and Future |
| Mohammed Naeem, Pakistan Welding Institute,
Pakistan Welding Institute, Scientific & Engineering Services Directorate,
Pakistan Atomic Energy Commission, Islamabad. |
|
2. Education, Training and Pre-qualification of Welding Procedures/Personnel |
| Dr.HabibUllah Chaudhry, Asif Iqbal and Mohammed
Naeem, Pakistan Welding Institute, Scientific & Engineering Services
Directorate, Pakistan Atomic Energy Commission, Islamabad. |
|
3. Programme of Technical Education and Vocational Tranining Authority (TEVTA) |
| Naveed Akhtar Cheema, Technical Education and
Vocational Training Authority (TEVTA). |
|
4. Authorized National Body (ANB) Status for PWI |
| Introduction, Importance & Bebefits for
Pakistan Mohammed Naeem, Munawar Hussain Abbasi and Syed Saleem Abbas,
Pakistan Welding Institute, Scientific & Engineering Services Directorate,
Pakistan Atomic Energy Commission, Islamabad. |
|
5. Historical Development of Fusion Joining |
| Group Captain Taskin Ullah Qazi, Arslan Ahmad
and Muhammed Naeem F-6 Rebuild Factory, Pakistan Aeronautical Complex, Kamra
Pakistan Welding Institute, Scientific & Engineering Services Directorate,
Pakistan Atomic Energy Commission, Islamabad. |
|
6.
Health and Safety in Electric Welding Process |
| A. Wadood, Fawad Inam, Imtiaz A. shah and R.A
shakoor, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi 23460, Distt. Swabi,
NWFP. |
|
7. Brazing of Diamond for High Speed Precision Machining Tools |
| F.A Khalid, Faculty of Metallurgy and Materials
Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and
Technology, Topi 23460, Distt, Swabi, NWFP
U.E Klotz, Swiss Federal Laboratories (EMPA), Uberlandstrasse 129, CH – 8600
Dubendorf, Switzerland. |
|
8.
Welding Technology for Magnet Support Structure |
| Mohammad Naeem and Asif Iqbal Pakistan
Welding
Institute, Scientific and Engineering Services Directorate, Pakistan Atomic
Energy Commission Islamabad. |
|
9.
Corrosion of Welded Mild Steel in Water obtained from a Natural Gas Well |
| Mohammad Shahid, Abdul Wadood, Syed Zameer
Abbass and Mohammad Siddique, Faculty of Metallurgy & Materials Science,
Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi
23460, Distt Swabi, NWFP. |
|
10.
Comparison between GTAW Process for AC Power Source and DC Power Source
using Aerospace Grade Aluminum Alloy |
|
Mushtaq
Hussain, Muhammad Ali Samdani, Naeem Ullah Dar and Iqbal Khan, National
Development Complex, Islamabad. |
|
11. Use
of GMAW and CNC Milling as a Rapid Prototyping Tool |
| R.A. Mufti, M.P Mughal, H.F. Junejo and M.
Siddiqui, Faculty of Mechanical Engineering, Ghulam Ishaq Khan Institute
of Engineering Sciences and Technology, Topi 23460, Distt, Swabi, NWFP. |
|
12. FEM
Based Predictive Distortion Analysis of TIG Welding Process |
| Mohammad Ejaz Qureshi, Naeem Ullah Dar and
Iqbal Khan, National Development Complex, Islamabad. |
|
13.
Effect of Repeated Repair Welding Cycles on the Mechanical Properties and
Chemical Composition of Low Alloy Steel |
| M. Zain-ul-Abdein, Project Management
Organization, Islamabad. |
|
14.
Submarine Pressure Hull Welding and Experiences Gained |
| Captain S H N Shah TI (M) and Lieutenant Ahmad
Fouad, Pak Navy, Karachi. |
|
15.
Latest Technologies in Pipe/Pipeline Pre-Post Heating & Welding |
| Ugo Giovanzana, Managing Director,
llion’s Tool
Works (ITW) Group, Representative of Miller Electric Manufacturing Company &
Hobart Brothers llion’s Tool Works (ITW) Group. |
|
16.
Welding of Aluminum Alloy-2219 in T6 (Solution Heat Treated and Artificially
Aged) conditions |
| Mushtaq Hussain, Muhammad Ali Samdani, Naeem
Ullah Dar and Iqbal Khan, National Development Complex, Islamabad. |
|
17.
Welding of Tubes in Confined Space for Delayed Neutron Scanning System |
| M.A. Rahim Khan and M. Saleem Ayub, Design &
Development Division, Karachi Nuclear Power Complex, P. O. Box 3183, Karachi
Karachi Nuclear Power Plant (KANUPP). |
|
|
UOP
Boosts Natural Gas Production
in Qadirpur, Pakistan |
|
The Oil and Gas Development Co.(OGDC;Islamabad, Pakistan;
www.privatisation.gov.pk/oilgas/ogdc.htm) has successfully started up a
natural gas (NG) membrane plant in Qadirpur, Pakistan, that increases
NG production capacity from 235 million
ft3/d to 400 million ft3/d. The plant
features a gas pre-treatment system designed and built by UOP LLC
(Des
Plaines, IL; www.uop.com) for the removal
of CO2 and H2S,and for the recovery of hydrocarbons. UOP's system uses a
chiller, a MemGuard membrane, and a Separex membrane system with cellulose
acetate plus (CAP) technology. UOP has also delivered two new membrane skids
that will enable OGDC to increase NG production capacity to 500 million
ft3/d later this year.
|
|
|
GIKI Open House &
Career Fair 2004
|
|
|
POST
GRADUATE
GIKI OPEN HOUSE 2004 |
|
FACULTY OF COMPUTER SCIENCE & ENGINEERING |
| S. # |
Project Team |
Project Title |
Advisor |
| 1. |
Badre Munir |
Combining
kriging with fuzzy logic for image enhancement |
Dr. Anwar M.
Mirza |
| 2. |
Rana Azeem
Muhammad |
Reducing the
IEEE802. 11b WLAN Handoff process latency |
Dr. Mehboob
Yasin |
| 3. |
Arshad Aslam |
HYPHEN-A
simplified technique for archival storage on P2P systems |
Dr. Mehbood
Yasin |
| 4. |
Awais Ahmed |
Intrusion Detection via System Calls
Analysis |
Dr. Mehbood Yasin |
|
|
FACULTY OF ELECTRONICS ENGINEERING |
|
5. |
Shehzad Anwar |
Photovoltaic
power tracking System |
Dr. Khasan
Karimov |
|
6. |
Dur-e-Zahra |
Adaptive Model
Reference Fuzzy flight Control Architecture |
Dr. Nisar
Ahmed |
|
7. |
Noor Muhammad |
A step-up -
step-down dc-dc voltage Converter using capacitors as Energy-storage
elements |
Dr.
Fazal-ur-Rahman Dr. Khasan Karimov Dr. Laiq Khan |
|
8. |
Umer Iqbal |
An Improved
Method to Estimate Intrinsic Small Signal Parameters of GaAs MESFET from
Measured DC Characteristics |
Dr. Mansoor
Ahmed |
|
9. |
Zahid Iqbal |
Low bit rate
video encoder H.264/MPEG-4 Part 10 Advance video coding (AVC) and its
implementation and optimization on Pentium-IV |
Dr.
Fazal-ur-Rahman |
|
|
FACULTY OF MECHANICAL ENGINEERING |
| 10. |
Shahid Maqsood |
Vibration analysis of
bolted joint using Finite Element Methods |
Dr. M. Abid |
| 11. |
Muhammed Iqbal |
3-D Non-Linear Finite
Element Analysis of Metal to Metal Contact Non-gasketed Flange Joints
under High Pressure and Temperature |
Dr. M. Abid |
| 12. |
Baseerullah |
3-D Nonlinear Finite
Element Analysis of Conventional Gasketed Flanged Joints under High
Pressure and Temperature Application |
Dr. M. Abid |
|
|
FACULTY OF METALLURGY & MATERIALS ENGINEERING |
| 13. |
Imtiaz Ali Shah |
Crevice corrosion study of
flange joints of oil and gas piping system |
Dr. M. Shahid |
| 14. |
Mirza Nadeem Baig |
Stainless steel strip
cladding of low alloy steels by submerged arc welding process |
Prof. Dr. Fazal A. Khalid |
| 15. |
Aakif Anwar Chaudhry |
Production of SiC
particulate reinforced aluminum matrix composites for thermal management |
Prof. Dr. Fazal A. Khalid
|
| 16. |
Sajjad Raza Khan |
Processing and
characterization of nickelaluminide: effect of particle size and
composition on microstructure and properties of sintered bodies |
Dr. Amir Azam Khan |
| 17. |
Sajjad Khan |
Effect of particle size of
WC (Tungsten Carbide) on the properties of cemented Tungsten Carbide
Composites |
Prof. Dr. Fazal A. Khalid |
|
|
FACULTY OF ENGINEERING SCIENCES |
| 18. |
Manzoor Shah |
Deposition,
Characterization & Investigation of Organic Semiconductors Thin Films |
Dr. Hassan Sayyad Dr.
Khasan Karimov |
| 19. |
M. Amer Qureshi |
Proper Projective Symmetry
in Spherically Symmetric Static Space Times |
Dr. Ghulam Shabir |
| 20. |
M. Rafiq Sial |
Spilt Schemes for
Hyperbolic Partial Differential Equations |
Dr. Syed Ikram Tirmizi |
|
|
GIKI Open House & Career Fair 2004 |
|
ABSTRACTS OF PROJECTS
FINAL YEAR PROJECTS AT OPEN HOUSE
2004 GIKI |
| 1. FACULTY OF COMPUTER SCIENCE & ENGINEERING |
|
1.1 Vi-Hand - Interaction of a
Human
Hand with a Virtual Environment
|
| PROJECT TEAM |
Emaad Rafi,
emaadrafi@hotmail.com
Muhammad Mustafa,
emem23@hotmail.com
Shazli Burki,
shazliburki@hotmail.com
Syed Ahsan Saqlain, saqlain007@hotmail.com
|
PROJECT ADVISOR
Dr. Sajid Qamar |
1.2 Scintilla: Human-Computer Interaction using Eye Blinks |
|
PROJECT TEAM |
Awais Amin Malik
awaismalik@hotmail.com
Junaid Rafiq,
sjrafiq@hotmail.com
Sana Ullah Sanai,
susanai@hotmail.com
Waqas Zia, waqaszia1@hotmail.com |
PROJECT ADVISOR:
Prof. Dr. Mehboob Yasin |
1.3 MSG Gradus: 'it speaks your language' (Language
Translation Engine) |
PROJECT TEAM
Ajay Ahuja, Zeeshan Ahmed, Zeeshan Ali
Khadim |
PROJECT ADVISOR:
Dr. Anwar M. Mirza |
1.4 Distance Estimation using Stereo Vision and Object
Structure |
PROJECT TEAM
Usman Saeed, usmanmsaeed@hotmail.com
Haroon Anwar,
mianharoon81@hotmail.com
Umer Munir Khan, unrealquake@hotmail.com |
PROJECT ADVISOR:
Dr. Sajid Qamar
Dr. Mohammad Irfan |
1.5 ACS for Offline and TARP for Online Image Compression
2004 (AOTO2004) |
PROJECT TEAM
Arshad Hussain
Kashif Saleem
Usman Ali
Mahmud A. Qureshi |
PROJECT ADVISORS:
Dr. Asif Gilani, Mr. Nasir Rajpoot |
1.6 BluEy3D - Textured Three Dimensional Modeling of Real
World Objects |
PROJECT TEAM:
M Kamran Nisar, mkamrannisar@hotmail.com
Imad Akbar,
imadakbaroo1@hotmail.com
Mehwish Bhatti,
u2000053@hotmail.com
Syed Hassan Ilyas, u990142@hotmail.com |
PROJECT ADVISOR:
Dr. Anwar M. Mirza |
1.7 MAP Digitization Framework with Route Planning and Real
Time Tracking through GPS (sponsored by Microsoft) |
PROJECT TEAM:
Muhammad Shoaib Khan, shoaibkhan@gmail.com
Muzammil Nasim,
muzammilnasim@hotamail.com
Farhan Iqbal,
farhancs10@hotmail.com
Aamir Ahsan Khan, ghourghusht@hotmail.com |
PROJECT ADVISORS:
Dr. Asif Gillani, Asst. Prof. FCSE GIKI
Ahmad Bilal (Microsoft Engineer)
ahmadb@microsoft.com
Asad Yaqub (Microsoft Engineer) asady@microsoft.com |
1.8 IP Telephony over Public Access Branch Exchange |
PROJECT TEAM
Ammar Ali Shigri
Jibran Khan
Mohammad Khalid
Saeed Farooq Khan |
PROJECT ADVISOR
Dr. Anwar M. Mirza |
| 2. FACULTY OF ELECTRONICS ENGINEERING |
2.1 Project Radus: An Indoor User Localization And Tracking
System |
PROJECT TEAM
Fahd Khan, fomey1@hotmail.com
Haassan Bashir,
hassaanbashir@hotmail.com
Sardar Bilal Alam,
sardarbilal@hotmail.com |
PROJECT ADVISOR:
Dr. Muhammad Asghar Saqib |
2.2 Target Locking and Tracking Vehicle |
PROJECT TEAM
Sardar M. Ahmed, sardarmahmad@hotmail.com
Sohail Butt,
Sohail14d@hotmail.com
M. Ali Azeem,
aliazeem@hotmail.com
Salman Rashid, Draggo87@hotmail.com |
PROJECT ADVISOR:
Dr. Nisar Ahmed |
2.3 Implementation of CDMA Codecs in Matlab |
PROJECT TEAM
Abdul Muiz Khan, muizkhan@hotmail.com
Arsalan Saeed Choudhry,
arsalansaeed@hotmail.com
Akif Bhatti, akifbhatti@yahoo.com |
PROJECT ADVISOR:
Dr. Fazal-ur-Rahman |
2.4 Implications of RAKE Receiver on CDMA based Mobile
systems |
PROJECT TEAM:
Ahmed Ghias ahmedghi@yahoo.com
Majid Naseer Uppal
majidnaseer@hotmail.com
Wahaj Tahir wahajtahir@hotmail.com |
ADVISOR:
Dr. Junaid Mughal |
2.5 Utracon (Urban Traffic Management and Control) |
PROJECT TEAM:
Anab Raees, anabraees@hotmail.com
Amer Ishtiaq
insomniius@hotmail.com
AbuBakr Siddique mrbakr@hotmail.com |
PROJECT ADVISORS:
Dr. Khasan Karimov |
2.6 Video Conferencing through Intelligent Camera |
PROJECT TEAM
Usman Nazar Rathore, usmanrathore@hotmail.com
Ahsan Azhar,
ahs80@hotmail.com
Masood Ahmed Kahloon,
masoodkahloon@hotmail.com
Yasir Rahid Awan, yrawan@hotmail.com |
PROJECT ADVISOR:
Dr. N. D. Gohar |
2.7 Robotic Mechanism for Land Mine Detection |
PROJECT TEAM:
Syed Ali Raza Zaidi
Hamza Shakeel
Shehr Bano,
Wajahat Sulman Malik |
PROJECT ADVISOR:
Dr. Laiq Khan |
2.8 SODIEM (Sound Direction Estimation) |
PROJECT TEAM:
Umair Ali Sheikh
umair82pk@yahoo.com
Usama Tariq Khan
usamatariqkhan@hotmail.com |
ADVISOR:
Dr. Junaid Mughal |
2.9 Replevin |
PROJECT TEAM:
Yousuf Jawwad, ysfjwd@yahoo.com
Umar Farooq,
umarfrq@msn.com
Nabeel Asim nabeelasim@hotmail.com |
PROJECT ADVISOR:
Dr. Laiq A. Khan |
2.10 Integrated Broadcast Interactive System Using
Satellite Technology (IBISS) |
PROJECT TEAM:
Tehseen Fazal, Tehseenfazal@hotmail.com
Syed Abid Rizvi,
Usman Anjum,Usmananjum69@hotmail.com
Bilal Mustafa, originalbillo@hotmail.com |
PROJECT ADVISOR:
Dr. N. D. Gohar |
| 3. FACULTY OF ENGINEERING SCIENCES |
3.1 Implementation of Biometric System Based on Iris
Patterns |
PROJECT TEAM:
Raza Parvez, Razaparvez@hotmail.com
Rawas Sultan,
rawassultan@hotmail.com
Farrukh Ahmed,
Fa92@hotmail.com
Abrar Mehmood Malik, abrarmalik@hotmail.com |
PROJECT ADVISORS:
Dr. M. Hassan Sayyad
Dr. S. J. H. Bukhari |
3.2 PAL (Photonics Air Link)"There is more to air than just
breathing" |
PROJECT TEAM:
Zahir Saeed Sheikh, zahirsheikh@hotmail.com
Asadullah Jawaid,
asad083@hotmail.com
Saad Ahmed Khan,
saadkhan1@hotmail.com
Syed Awais Ahmad, viperzvenom@hotmail.com |
PROJECT ADVISOR:
Dr. Hassan Sayyad |
3.3 OPABX (Optical Private Automatic Branch Exchange |
PROJECT TEAM:
Asad Zaidi, smasad83@hotmail.com
Azeem Zulfiqar,
azeem@hotmail.com
Kashif Moin,
kashifmoin@hotmail.com
Sarosh Ahmed, saroshahmed@hotmail.com |
PROJECT ADVISOR:
Dr. Muhammad Hassan Sayyad |
3.4 Digital Terrain Modeling Using OpenGL |
PROJECT TEAM:
S. Ghulam Nizam-ud-Din, simulationist1979@yahoo.com
M. Harris Hussain Malik,
Harris81@hotmail.com
Rehan Ahmad Meer, Ram269@hotmail.com |
PROJECT ADVISORS:
Dr. S Ikram Tirmizi, Dr. Ghulam Shabbir |
3.5 Study of Organic Thin Films |
PROJECT BY:
Javaria Ahmad |
PROJECT ADVISORS:
Dr. Ibrahim Qazi, Dr. Khasan Karimov,
Dr. Peter H. Draper |
3.6 Study, Characterization & Practical Implementation of a
Heterojunction Photoelectric Sensor |
PROJECT BY:
Leenah Nasir |
PROJECT ADVISORS:
Dr. M. Hassan Sayyad, Dr.Khasan Karimov,
Dr. Fida M. Khan |
| 4. FACULTY OF MECHANICAL ENGINEERING |
4.1 Design of Gravity Pump |
PROJECT TEAM:
Faisal Farooq, faisalfarooq 146@hotmail.com
Kamran Kalim Abbasi, kk
abbasi@hotmail.com
Ali Rahsid,
alirashid01@hotmail.com |
PROJECT ADVISOR:
Dr. Mykola Bannikov |
4.2 Design, Fabrication & Installation of Micro Hydro Power
Plant |
PROJECT TEAM:
Mubeen Waqar, mubeenw@hotmail.com
Fawad Zaheer,
zaheerfawad@hotmail.com
Adnan Aslam,
Kamran Jehangir,
Malik Kamran,
786@hotmail.com
Sohaib Tariq, sohaib tariq@hotmail.com |
PROJECT ADVISORS:
Dr. Javed Ahmed Chattha |
4.3 Design and Manufacture of an Automated Storage and
Retrieval System |
PROJECT TEAM:
Salman Naeem, naeem salman83@yahoo.com
Ali Abbas Bukhari, saaarb 2000@yahoo.com |
PROJECT ADVISOR:
Mr. Tariq S. Khan |
4.4 Study and Application of Leak Detection System for an
Industrial Setup to Monitor and Control Leakage |
PROJECT TEAM:
Hafiz Waqas Haider Shah
Muhammad Usman Saleem |
PROJECT ADVISOR:
Dr. M. Abid |
4.5 Study and Implementation of Hole Drilling Technique for
Residual Stress Determination |
PROJECT TEAM:
Muhammad Junaid Khan, maitojunaid82@yahoo.com
Ahmer Pervez,
ahmerlalazari@yahoo.com
Muhammad Waqas Ahmed, gikian 2000@hotmail.com |
ADVISOR:
Dr. M. Abid |
4.6 Reliability Centered Maintenance of Centrifugal Pumps |
PROJECT TEAM:
Said Rasool Shah, syedrshah@hotmail.com
Zia ur Rehman, reman zia@hotmail.com |
ADVISORS:
Mr. Faheem Akhtar
Dr. Mohammad Abid |
| 5. FACULTY OF METALLURGY & MATERIALS ENGINEERING |
5.1 Development of Solar Powered Cathodic Protection System
for Buried Oil / Gas Pipelines |
PROJECT TEAM:
Fawad Inam, inamfawad@hotmail.com
Muhammad Farooq, mfarooqsafa99@yahoo.com |
PROJECT ADVISORS:
Dr. M. Shahid, Dr. Khasan Karimov |
5.2 Hard Banding of Drill Collars and Pipes for Oil and Gas
Industry |
PROJECT TEAM:
Atta-ur-Rehman, atta82@hotmail.com
M. Mudassir Fida,
mudassirfida@hotmail.com
Ahmed Tanveer Cheema (FME),
atanveercheema@hotmail.com
Malik Shabab Sultan (FME), malikshabab@hotmail.com |
PROJECT ADVISORS:
Dr. Fazal A. Khalid.
Dr. Peter Draper
Dr. M. Abid |
5.3 Sintering of Low Porosity Ultra Fine Alumina |
PROJECT TEAM:
Wajahat bin Tariq, bin tariq@hotmail.com
Waqas Ahmed Siddiqui,
vicki2sharp@hotmail.com |
PROJECT ADVISORS:
Dr. Peter H. Draper, Dr. S. H. Bukhari
(FES) |
|
TITLES OF
PAPERS
8th INTERNATIONAL SYMPOSIUM ON ADVANCED MATERIALS
Held at Islamabad
Organized by: Dr. A. Q. Khan
Research Laboratories |
|
|
1.
DEVELOPMENTS IN THE SYNTHESIS, PROCESSING AND APPLICATIONS OF LIGHT WEIGHT
METALLIC MATERIALS |
|
| F. H.
(Sam) Froes and B. Trindade*, Institute for Materials and Advanced Processes
(IMAP), University of Idaho, Moscow, USA *Departmento de Engenharia Mecanica,
aculdade de Ciencias e Tecnologia Universidade de Coimbra, Coimbra, Portugal
|
|
|
2.
NANOCRYSTALLINE CERAMIC POWDERS PREPARATION, CHARACTERIZATION AND
APPLICATION |
|
| Hartmut Fuess
Institute for Materials Science, University of Technology, Darmstadt,
Germany |
|
|
3.
A STUDY OF ELECTRODEPOSITED Zn-Co THIN FILMS BY AUGER SPECTROSCOPY AND XPS |
|
|
D.E.O. Carpenter, *M. A. Ashworth and J.P.G.
Farr** Fundacao Universidade Regionale de Blumenau, Brazil *IRC in Materials
Processing, The university of Birmingham, Birmingham, UK **School of
Engineering, The University of Birmingham, Birmingham, UK |
| 4.
PRINCIPLES FOR TRIBOLOGICAL COATINGS SELECTION AND
DEVELOPMENT |
| Y. A. Kharlamov, N. A. Budagyanch and M.Y. Kharlamov
Vladimir Dalh East Ukrainian National University Lugansk, Kvartal Molodeznyu,
Ukraine |
|
5. TIME MODULATED CHEMICAL VAPOUR
DEPOSITION OF NANOCRYSTALLINE DIAMOND COATINGS FOR BIOMEDICAL APPLICATIONS |
|
Nasar Ali, centre for Mechanical Technology
and Automation, Department of Mechanical Engineering, University of Aveiro,
Aveiro, Portugal |
| 6.
QUALITY CONTROL BY RADIOANLYSIS OF SILICEOUS MATERIALS |
| Hendrik A. Das ECN, P.O.Box 1 1755 ZG Petten ( N.H. ) The
Netherlands |
|
7. REVIEW: CREEP BEHAVIOR OF
PARTICULATE REINFORCED METAL MATRIX COMPOSITES |
|
A. A. E. N. Al-Badrawy Production Engineering
and Mechanical Design, Faculty of Engineering Menoufiya University, Shebin
El-Kom, Egypt |
| 8.
PROPERTIES OF THIN FILMS PRODUCED BY MAGNETRON SPUTTERING |
| B. Mukashev and S. Romankov,
Institute of Physics and Technology, Almaty, Kazakstan |
|
9. NOVEL TECHNIQUES FOR CHARACTERIZATION
AND TRANSPORT PROPERTIES OF LONG-LENGTHS OF Bi- 2223 CONDUCTORS |
|
M. N. Khan and Kh. Zakaullah, GIK Institute of
Engineering Sciences and Technology, Topi, Pakistan |
| 10.
SCOPE FOR THE USE OF THERMAL RADIATION OF OXIDE COATINGS IN SOLAR
ENGINEERING |
| M. S. Saidov, Physical
Technical Institute of Academy of Science of Uzbekistan, Tashkent,
Uzbekistan |
|
11.
DEVELOPMENT OF NEW MATERIALS FOR NEW ULTRA-SUPERCRITICAL HIGH EFFICIENCY
POWER PLANT BOILERS AND TURBINES |
|
A. Fleming, *I. A. Shibli and N. L. M. Hamata, European Technology
Development, Surrey, UK |
| 12.
ROLE OF MANUFACTURING PROCESS PARAMETERS ON THE CHARACTERISTICS OF ALUMINUM
MATRIX COMPOSITES |
| A. I. O. Zaid, Industrial
Engineering Department, Faculty of Engineering and Technology, University of
Jordan, Amman-Jordan |
|
13.
EUROPEAN DEVELOPMENTS IN THE ASSESSMENT OF CRACKS IN HIGH TEMPERATURE
MATERIALS |
| I. A. Shibli, N. L. M.
Hamata, *D. Smith, **U. Gampe and S. Marie*** European Technology
Development, Surrey, UK *Department of Mechanical Engineering, University of
Bristol, UK, **Dresden Technical University, Germany ***Commissariat a
L'Energie Atomique, Saclay, France |
| 14.
REMAINING LIFE ASSESSMENT AND EXTENSION IN HIGH TEMPERATURE COMPONENTS OF
POWER AND PETROCHEMICAL PLANT |
| A. Fleming, European
Technology Development, Warwick Gardens, Ashtead, Surrey, UK |
|
15.
MICROSTRUCTURAL ANALYSIS OF SPINODAL DECOMPOSITION IN SUPER DUPLEX STAINLESS
STEELS |
A. Shariq and M.
Hattestrand, Chalmers University of Technology, Gotebor, Sweden |
|
Plant performance
monitoring: |
|
Fauji fertilizer company (FFC), Pakistan’s
largest fertilizer manufacturer launched
Technical Monitoring Program (TMP) at FFC-3 ,
its newly acquired urea manufacturing
facility (Previously Paksaudi Fertilizer Co.
Ltd.). (TMP) is a comprehensive plant
performance evaluation program developed by
FFC which helps maintaining very high Plant
service and capacity factors.
info@peits.com |
| |
|
 |
|
